Closure Torque Testing Systems

Closure Torque Testing is a measure of the torque force required to either apply or remove a cap or lid on a container.

Computer-controlled Torque Testing Systems

Mark-10

CTA Cap Torque Tester Picture of Mark-10 Cap Torque Tester CTA

Capacity: 12 lb-in, 50 lb-in or 100 lb-in
Accuracy: +/- 0.5% FS
Units: lb-in, kgf-mm & N-cm
Max sample size: 7.5” diameter
Optional: Serial data cable, adjustable grips & flat grips

MGTC Cap Torque Tester Picture of Mark-10 MGTC Cap Torque Gauge

Capacity: 12 lb-in, 50 lb-in or 100 lb-in
Accuracy: +/- 0.5%FS
Units: lb-in, kfg-mm & N-cm
Sample size: 0.65”â€“ 1.55” diameter

Imada

DTX2 Cap Torque Tester Picture of Imada DTX2 Cap Torque Tester

Capacity: 15 lb-in, 40 lb-in or 85 lb-in
Accuracy: +/- 0.5%FS, +/- 1 LSD
Units: lb-in, kgf-cm & N-cm
Sample size: 0.5”â€“ 7” diameter
Optional: Serial data cable & 4” pegs

MTG Motorized Cap Torque Tester Picture of Imada MTG Motorized Cap Torque Tester

Capacity: 15 lb-in, 40 lb-in or 85 lb-in
Accuracy: +/- 0.5%FS, +/- 1 LSD
Units: lb-in, kgf-cm & N-cm
Speed: 2-15 RPM
Sample size: 0.8”- 7” diameter
Sample height: 3.2”- 9.4”
Optional: Serial data cable

Mecmesin

Orbis Closure Torque Tester

Capacity: 50 lb-in
Accuracy: +/- 0.5%FS
Units: N-m,N-cm, mN-m, gf-cm, kgf-cm, kgf-m, ozf-in, lb-in & lb-ft
Sample size: 0.4”-7.5” diameter

Tornado Closure Torque Tester Picture of Mecmesin Tornado Manual Torque Tester

(Measures both slip torque & bridge torque)
Capacity: 13 lb-in, 26 lb-in, 50 lb-in & 90 lb-in
Accuracy: +/- 0.5%FS
Units: N-m,N-cm, mN-m, gf-cm, kgf-cm, kgf-m, ozf-in, lb-in & lb-ft
Sample size: up to 7.5” diameter (Varies with sensor capacity)

Child-Resistant Closure Tester

(Measures both force downward/push & cap torque/twist)
Capacity: 500N/110 lbf & 10N-m/90 lb-in
Accuracy: +/- 1%FS
Sample size: 0.4”- 7.5” diameter

Vortex-D Motorized Closure Torque Tester

Capacity: 13 lb-in, 52 lb-in & 90 lb-in
Accuracy: +/- 0.5%FS
Speed: 0.1-20 RPM
Sample size: Top 0.3”- 2.1”, Bottom 0.4”- 7.5” diameter
Maximum sample height: 17.7”
Maximum top load capacity: 11 lbf

Torque testing systems gives optimum testing performance and evaluation options, enabling you to get the most from your test measurements.

Controlled via advanced software
Create sophisticated test programs
View data graphically in real time
Gain enhanced level of test data information
Perform in-depth evaluation of results
Ideal for Quality Control Laboratory
Capacities from 0.3N.m to 10N.m

Motorised Torque Testers

Test stands are a cost-effective solution for straightforward torque tests.

Simple to operate
Combines with Mecmesin's digital force & torque display
Rugged design suitable for factory floor
Combines with data acquisition software for additional test evaluation options
Capacities from 1.5N.m to 10N.m

Digital Torque Testers

For manual closure torque testing, we have a range of including:

Digital Torque Testers

Tamper-evident closure testing
On-board memory; up to 500 readings
Pass/fail alerting
Versatile mounting table
Range of capacities

Digital Torque Tester

Compact, portable and affordable
Clockwise and counter-clockwise digital torque capture
Simple to operate
Versatile mounting table
6N.m capacity

Grips and Fixtures

Grips and fixtures are integral components of our test systems. We offer a range of closure holders, V-Blocks and saddle plates for closure torque testing applications. For specialised requirements we also offer a customised fixture design service to match your specification.